The "all" option can be used to display EDT entries marked as "not present" or "not connected", which are normally supressed.
The "serial" option will obtain and display the device serial number (if the Inquiry optional vital product data serial page is supported).
The "status" option will issue a Test Unit Ready command and present
device status information (Ready, Not Ready, Busy, Reserved, etc).
[ Added mainly for ASE testing to quickly locate reserved devices. ]
These three options are in addition to the "capabilities" option previously supported. Only one of "capabilities", "serial", or "status" will be displayed (parsed in that order).
scu> set default retries VALUE (where VALUE is range 0 - 255).
This controls the number of retries done on things like SCSI BUSY.
BTW: The only errors automatically retried (if anabled) is BUSY. Retries for "SELECTION TIMEOUT" are no longer performed, so Roger's scripts can detect this error (which normally shouldn't happen).
Last modified: December 29th, 1999
scu> sbtl 0 2 0 Device: RZ25, Bus: 0, Target: 2, Lun: 0, Type: Direct Access scu> stop immed scu> tur scu: 'test unit ready' failed on device 'RZ25' at nexus [0/2/0] scu: Sense Key = 0x2 = NOT READY - Logical unit is NOT ready, Sense Code/Qualifier = (0x4, 0x2) = Logical unit not ready, initializing command required scu>
wisdom# scu show edt status CAM Equipment Device Table (EDT) Information: Bus/Target/Lun Device Type ANSI Vendor ID Product ID Revision Status -------------- ----------- ------ --------- ---------------- -------- ------ 0 4 0 CD-ROM SCSI-2 DEC RRD42 (C) DEC 4.5d Not Ready 0 5 0 Direct SCSI-2 DEC RZ26 (C) DEC 392A Ready 2 1 0 Direct SCSI-2 DEC RZ28 (C) DEC D41C Reserved 2 2 0 Direct SCSI-2 DEC RZ28 (C) DEC T436 Ready 2 3 0 Direct SCSI-2 DEC RZ28 (C) DEC D41C Ready 2 7 7 Processor SCSI-2 DEC Digital UNIX ASE TMV2 Ready wisdom# scu show edt serial CAM Equipment Device Table (EDT) Information: Bus/Target/Lun Device Type ANSI Vendor ID Product ID Revision Serial Number -------------- ----------- ------ --------- ---------------- -------- ------------- 0 4 0 CD-ROM SCSI-2 DEC RRD42 (C) DEC 4.5d0 5 0 Direct SCSI-2 DEC RZ26 (C) DEC 392A 0000025035333108 2 1 0 Direct SCSI-2 DEC RZ28 (C) DEC D41C 0000000045165735 2 2 0 Direct SCSI-2 DEC RZ28 (C) DEC T436 0000000035074980 2 3 0 Direct SCSI-2 DEC RZ28 (C) DEC D41C 0000000042569135 2 7 7 Processor SCSI-2 DEC Digital UNIX ASE TMV2 wisdom#
This ATAPI Capabilities page is read-only, so only the "show page" command was affected by this change. This output is shown below: scu.atapi> show page cdcap (capabilities keyword is also accepted) ATAPI CD-ROM Capabilities Parameters (Page 0x2A - Current Values): Page Header / Data: Page Code: 0x2a Parameters Savable: No Page Length: 18 CD-R Read Support: Yes CD-E Read Support: No CD-R Method 2 Support: No CD-R Write Support: No CD-E Write Support: No Audio Play Support: Yes Composite Audio and Video: No Digital Output Port 1 Support: No Digital Output Port 2 Support: No Mode 2 Form 1 (XA) Support: Yes Mode 2 Form 2 Support: Yes Multi-Session or Photo-CD Support: Yes CD-DA Commands Supported: Yes CD-DA Stream is Accurate: No Combined R-W Information: Yes R-W De-interleaved & Corrected: No C2 Error Pointers Supported: Yes Support ISRC Information: Yes Support Media Catalog Number (UPC): Yes Prevent/Allow Media Locking: Yes Drive Media Currently Locked: No Prevent/Allow Media Jumper: 0 (Power up to allow state) Eject via Start/Stop LoEj bit: Yes Loading Mechanism Type: 1 (Tray type loading mechanism) Seperate Volume Controls: Yes Seperate Channel Muting: Yes Supports Disc Present (SDP): No Software Slot Selection (SSS): No Maximum Speed Supported: 1411000 (1.4 MBytes/second) Volume Levels Supported: 255 Buffer Size Supported: 262144 (256 Kbytes) Current Speed Selected: 1411000 (1.4 MBytes/second) Format of Digital Output: 0x18 scu.atapi>