This command displays the message associated with the CAM status value. Device nexus information is not necessary for displaying status messages.
Format: scu> show cam status value Examples: % scu show cam status 0xa CAM status = 0xa = CAM_SEL_TIMEOUT - Target selection timeout % scu show cam status 0x13 CAM status = 0x13 = CAM_UNEXP_BUSFREE - Unexpected BUS free %
Format: scu> show scsi { ascq value | key value | status value }This command displays the message associated with the two byte sense code/qualifier value specified. The value expected contains the sense code in the upper byte, and the qualifier in the lower byte.
Format: scu> show scsi ascq value Examples: % scu show scsi ascq 0x0401 Sense Code/Qualifier = (0x4, 0x1) = Logical unit is in process of becoming ready % % scu show scsi ascq 0x2800 Sense Code/Qualifier = (0x28, 0) = Not ready to ready transition (medium may have changed) %This command displays the message associated with the sense key value specified.
Format: scu> show scsi key value Example: % scu show scsi key 6 Sense Key = 0x6 = UNIT ATTENTION - Medium changed or target reset %This command displays the message associated with the SCSI status value specified.
Format: scu> show scsi status value Example: % scu show scsi status 0x28 SCSI Status = 0x28 = SCSI_STAT_QUEUE_FULL = Command tag queue is full %
Last modified: December 29th, 1999